Custom only injection molding machine is a production machine widely used in industry, also called injection molding machine or injection molding machine. For injection molding machines, energy saving is an inevitable issue. What is the difference between servo injection molding machines and ordinary injection molding machines in energy saving?

　High Quality Custom Design only injection molding machine

　　The Design only injection molding machine is generally driven by an electric motor. When the machine is turned on, the work of the motor and the motor has been running at full power and full load.

　　Therefore, looking at the parameters written on the ordinary injection molding machine and the motor power, then it is the actual energy consumption of the ordinary injection molding machine.

　　Servo High Quality only injection molding machine is different from ordinary injection molding machine. The difference is that the servo injection molding machine uses an advanced servo motor to intelligently drive the motor to work. For example, to produce a certain product, the production cycle takes 30 seconds, and the pressure-holding cooling takes 15 seconds.

　　The servo motor is not working during the pressure-holding cooling time, that is, it only works for fifteen seconds, then the fifteen seconds of pressure-holding and cooling will save power.

　　The formulas for calculating the electricity consumption rate of the servo Custom solely injection molding machine and the ordinary injection molding machine are: ordinary injection molding machine: motor power + electric heating power = actual power consumption Servo injection molding machine: motor power * 0.5 + electric heating power * 0.4 = actual power consumption quantity.

　　Therefore, the energy saving rate of the servo Custom solely injection molding machine is as high as 30-70% compared with the ordinary machine. Why is there such a big difference in energy saving between servo injection molding machines and ordinary injection molding machines? Mainly their motors are different. The motor of an ordinary injection molding machine: keep running, even if the machine has stopped moving, the motor is still running.

　　The motor of the servo High Quality only injection molding machine: Each time a different action is performed, the corresponding power will be used to provide power. If the machine is stalled, the motor of the servo injection molding machine will stop running.

　　In the actual use of the High Quality Custom Design solely injection molding machine, the machine will not be in working condition all the time, then the motor of the servo injection molding machine stops running, which will save a lot of electricity. Accumulated, the whole production of the servo injection molding machine is definitely more energy-saving than the ordinary injection molding machine.